03-06 Yamaha Blaster Dc Harness Kit
This is a complete DC harness setup for you blaster.
It is all plug and play and a straight forward installation. You get the battery and Trail Tech voltage regulator included. The TrailTech comes with long bare wires. I trim them to length and terminate it to match your new custom harness. The battery will sit in the tool box under the seat. You will need to make a small notch in the top plastic wall of the tool box for the battery wires to go in, you can easily do this with a box cutter. The voltage regulator goes in the same spot where your old one is.
What you get
- New Custom DC harness for 03-06 Blaster
- Battery
- Trail Tech regulator terminated to match
How its set up
- NO TORS
- No Park brake
- No oil tank
- Key
- Stock light switch
- Hi/low headlights
- Brake light
If you need this changed up a bit feel free to leave me a note below. If there will an extra charge you will be invoiced for the extras. Here is an Just an example of prices or changes.
Extra circuits are 10.00. So for example.
Add whip. + plus 10.00
AddBrake light + 20.00 (front and back)
Add light bar + 10.00
Bigger changes may be more.